Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

RPM sensor

posted by  someone claiming to be bl on  Mon Jun 23 14:35 CST 2003 [RELATED]

Am about to change the heat control valve on a 91 740 and am gona do the RPM sensor while I'm back there. According to the FAQ, it is mounted in a "flimsey bracket" that is very easy to break and you've had a sure enough bad day if you break it to the tune of pulling the tranny tpo fix it. This one looks to just be held in by a single small bolt and I see no bracket holding it. Am I missing something? Surely it can't be this easy but I hope so.

bl








  REPLY TO THIS MESSAGE    PRINT   SAVE 

RPM sensor

posted by  Brian S on  Mon Jun 23 15:03 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

On my '93 940 the RPM sensor just had the one bolt holding it down... it was easy (as far as those things go) to pull. I'd read about that bracket, too... not sure which cars have it, but glad mine didn't.

- Brian '93 945T







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.