Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'rebuilt' puller fan spins backwards--what's up? 200 1983

posted by  frankly on  Thu Jun 26 11:01 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 21 13:20 CST 2000
[RELATED]

Greetings,

Please tell me why "puller" fan I just had "rebuilt" for me (at a junkyard) spins backwards. Or am I crazy? Out in sun too long?

Guys in back room swapped a Delco motor into original frame and blade assembly (14" dia. or so, from 4 cyl. GM FWD car, 1986 approx.) so I could screw it all back in to 4 holes on engine side of radiator.

I saw it run, figured all's well....

Just hooked it up to the battery, the thing spins clockwise, opposite direction I marked on blade way back when (1 1/2 years ago).

If I reverse polarity, the motor won't run at all.

There's a left-hand thread on the nut holding the blade to the motor shaft so shouldn't the motor turn counterclockwise?


What's up here?

Should I reinstall the thing as is and get on w/ better things?

--Frank
--
Frank R. '83 245DL 170K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 'rebuilt' puller fan spins backwards--what's up? [200][1983]
posted by  frankly  on Thu Jun 26 11:01 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.