Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

wiring harness 200

i would like to know if the wiring harness of a 1987 volvo 240 could be replaced with that taken from a 1988 thru 1993 volvo 240. are all the connector exactly the same.
regards to all.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

wiring harness 200

'88 would be essentially identical (or nearly so) since both cars are LH 2.2, but you would have to be the final judge. In 89 the LH 2.4 models were introduced.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

wiring harness 200

rhaire,
thanks for your response. a follow-up question is that, could earlier 240 model say 1983 thru 1986 with a decent engine wiring harness work on a 1987.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

wiring harness 200

83 and 84, no way. 85 and 86 are LH 2.2 and very similar to the 88. Except the 85 244 turbo (no turbo harness will work).







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.