Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2000

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Manifold Torque Settings

posted by  meh on  Thu Jul 17 02:08 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

What are the torque levels for exhaust manifold bolts and turbo bolts?

Thanks again








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Manifold Torque Settings

    posted by  Steve on  Thu Jul 17 04:27 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 07:16 CST 2014
    [RELATED]

    Exhaust manifold nuts around 15 ft-lbs. Turbo nuts to manifold are 22 ft-lb (30 Nm) but you will have to use a 90 degree extension on the torque wrench for access. Exhaust pipe to turbo is 22 ft-lb (30 Nm). Cat to exhaust pipe is 18 ft-lb (24 Nm)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.