Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

240, 1989, 15000M engine cut off 200

posted by  gabriel on  Mon Aug 25 08:32 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 21 09:48 CST 2013
[RELATED]

For about 6 months or so, once every 3 weeks, I am driving and the engine cuts off. No warnings, no nothing, it can be cold weather or warm, I can be driving 50, 80 MPH or standing, the engine stopps. About 5 minutes later the car starts, and drives for an other 3 weeks. The engine lights is on for about 1 or 2 days, error code 144 is in the computer. Error code 144 is "load signal is missing". This is a wire between the ezk and the lh computer, anywhere from .3 to .6 VDC. I measured with a voltmeter. The wire is okay, the connectors are okay, the voltage is there. Can somebody help me please??????????








  REPLY TO THIS MESSAGE    PRINT   SAVE 

240, 1989, 15000M engine cut off 200

posted by  someone claiming to be adendum on  Sat Aug 30 17:43 CST 2003 [RELATED]

Check the Air Mass Meter, located behind the airbox on the left side of the engine compartment. Also, the jetronic computer, or event the Lambda Sond Unit. I replaced all three on my 87 wagon after having the same problem, and it hasn't done it since.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.