I am in process of restoration of a 65 122s. I have found the supplier I think may carry these parts; Veteranprodukter AB. If any other suppliers or suggestion please do tell. Here is the part description: the inner sheet metal support that spans between inner fender liner to top of fender (the piece that the fender bolts to.)I am not sure what they are called, or if they are even listed in the parts list. are they calling it the "front wing reinforcment member?" I would hate to order wrong part! does any one remember ordering these or suggested replacement method? i was going to fab some, but off the shelf would sure be easy.
dave inlay in michigan

I purchased a pair of inner fenders from Olof of http://www.vintageimparts.com/ in Vancouver,B.C. I can't say for sure but I think he may use Veteranprodukter AB.as one of his suppliers. The US price should be around $65ea. All the fender mounting hardware I ordered from CVI and would have received my order quite fast if it wasn't for Canadian Customs.

Jim

Have a look at www.cvi-automotive.se Mikael has an illustrated parts list in PDF format. Those box sections are cheap, his are galvanised. The fast nuts are also available seperately.


Regards


Pete

Awsome, looks like CVI has them, wow quite the catalog of parts they have. My car is in good shape except for the rot on those supports.previous owner held fenders on with wire ties. thank you very much for help. Brickboard rocks!
Dave in Michigan

CVI lists them as "inner wing repair" left hand side and right hand side (page 35 in their PDF catalog). 375 Swed Kroner each which equals about $49 US (plus shipping of course). I need these as well and have been avoiding dealing with it until....

More info i can pass on concerning the front inner fender repair section:
(copy of email i just got from Scancar)

Subj: Re: Enquiry from Scandcar volvo shop
Date: 10/15/2003 07:56:07 Eastern Daylight Time
From: scandcar@scandcar.nl (Scandcar Volvo Klassiekers en onderdelen)
To: rycrktman1@cs.com (david inlay)
Dear Dave
We can supply those items (original from Volvo as repair panel) Eur 58-- per
side freight for 2 pc to Michigan by priority worldpack special Eur 48--
(appr 5-10days)
You can pay by Visa or MC.
Scandcar
Sjef Spijkers

Is this the whole box section or just the top layer with the spring steel
bolt inserts in it? BTW be sure and check to see if it comes with the inserts
because they are hard to find and they rust along with the flange.

On one of my cars I ended up putting longer bolts through the bottom of the
box section.

I have never tried to buy them because I never had a clue that they might
be available. Probably would not have been able to afford them....

Let me know what you find out.
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma

www.scandcar.nl . They have a lot more parts then they list on their site. Drop Sjef an email and he will get back to you fairly quick. The one thing that stinks is the shipping from the netherlands.
-Gil