Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

M45 for M46 tranny swap? 200 1979

posted by  someone claiming to be Mikail on  Sun Oct 26 16:48 CST 2003 [RELATED]

I'd like to install an M46 in my 242 DL brick that currently had an M45 transmission. Do I need to do anything special/different to install an M46?








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

M45 for M46 tranny swap? 200 1979

posted by  rhaire on  Mon Oct 27 10:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 4 10:16 CST 2014
[RELATED]

Well, for sure, the front section (the minimum) of the driveshaft from an M46 car. And the OD relay and wiring and so forth. Beyond that, I don't really know but I doubt the swap is very complicated.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.