Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2006 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Speaking of Motor Mounts 900 1993

posted by  hip82 on  Mon Nov 3 13:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 12 10:12 CST 2001
[RELATED]

Had my '93 in for servicing today. Mechanic says loud engine noise is most likely due to old/leaking hydraulic motor mounts. I plan to replace them, since they are most likely 11 years old. FAQ seems helpful. I'm particularly impressed with the homemade tools to lift the engine, but if one does not have any spare 2 x 6's laying around, it seems to me with the cost of lumber, just rent an engine lifter for the day.

I think this would also be a good time to do the trans mount while the engine is lifted. Any other thoughts/advice on a 940 mount replacement?

Thanks, Tom








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Speaking of Motor Mounts 900 1993

uid 6573's pic
posted by  javalion on  Mon Nov 3 15:40 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 23 09:57 CST 2014
[RELATED]

II used ScanTech and I wasn't impressed at all watching engine movement while my son shifted with the brakes applied. Bricksters in the know like the Volvo mounts. I think the tranny mount would be done separately.
--
Tom F Four 940s, RIP '78 244







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.