I want to fix the lumbar support on both my seats. The cable is broken.
Any advise on how to proceed???

http://home.no.net/ebrox/

Check this site. Look on the left side and Click on Tony's seat rebuild. I believe the 700 is much the same as the 200.

There's some pics there too.

Take the seat out of the car...it's well worth the Ten minutes. The first time I left the seat in. After taking it out the second time...I'll NEVER keep it in again. You actually save time taking out if the car and putting it up on a work bench.
--
'75 Jeep CJ5 345Hp ChevyPwr and two motorcycles: it wasn't Volvos safety , it was Longevity that sold me

Thanks for your info. I have fixed my seat, and your infor got me going!!!!!!
As I dug into the process I found that 92 740 leather seats are a little different. The lumbar is a 5" band of strong nylon running accross the width of the foam with 2 rectangular clips on each end. The hooks on the tensioner end break. I used 4 s rings from my hardware store.

ipdusa.com - they have a fairly easy-to-use kit I used a couple of summers ago. Took me about three hours (with no prior seat experience).
--
Darius in Albany NY '86 744 GLE (174K); '91 745 Turbo (164K)

check the FAQs, or search using "lumbar repair" or "lumbar support"--lots of prior posts
--
We have met the enemy and they is us. [Pogo] '99 S70 cop car : Rough Rider tires& suspension, Walmart fog lights, speakers by ebay, ambiance by Pall Mall, trim by Le Duc d'Tape

Someone made a post last month regarding the lumbar support cable. They where pretty discriptive as to the procedure they took. They used a coat hanger to fix it! Check it out... might help. Worked for me!

Anastasia
86' 740t 364,000