Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2015 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

M46 OD=where to get those pesky plastic washers? Or should I use copper? 200 1983

I just rebuilt and installed a good OD on my son's 83 245...I could not find those plastic washers to prevent leaks on the upper 2 bolts, so I got 2 soft copper washers and it is installed and running. Did I do a bad thing?
Now I have his original OD on the bench. I plan to rebuild it and keep for future use. should I use the copper washers or look for the plastic ones...a la IPD?
Gracias,
el Raidman








  REPLY TO THIS MESSAGE    PRINT   SAVE 

M46 OD=where to get those pesky plastic washers? Or should I use copper? 200 1983

Plastic or copper, no difference in sealing capability. It's a matter of cost.

Both should be at your LOCAL well stocked hardware store. The store with the row of thin cardboard partioned boxes on trays filled with many things you and I have not a clue as to where they are needed until one of them breaks.

Duane








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

M46 OD=where to get those pesky plastic washers? Or should I use copper? 200 1983

I needed some about three years ago and I got them at a Volvo dealer.

Randy







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.