Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

valve cover gasket, which side to head 700

posted by  kreb on  Sat Feb 14 11:31 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

on my valvecover gasket there is rubber textured side and smoother side. which side touches the head and which goes to the cover? the smooth side had print on it , i guess the manufacturer's name.

benjamin








  REPLY TO THIS MESSAGE    PRINT   SAVE 

valve cover gasket, which side to head 700

posted by  mapleleafer on  Sat Feb 14 11:54 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 9 00:36 CST 2013
[RELATED]

The gasket is symmetrical - put it either way. Both the head and cover are machined castings and don't have the sealing problems that stamped steel or plactic covers have.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.