Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ChainsawMethod for resistor? 200 1989

posted by  someone claiming to be Cabbie2169 on  Wed Mar 17 15:50 CST 2004 [RELATED]

Does Don Foster's "chainsaw" method of replacing the blower fan also provide the means to replace the resistor? Or can you only accomplish the blower fan replacement? I think (not sure) that the resistor is in the blower housing..true?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ChainsawMethod for resistor? 200 1989

posted by  Bama740 on  Thu Mar 18 02:29 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 9 06:07 CST 2010
[RELATED]

Since no one else has asked I will (everybody else probably knows). What is Don Foster's chainsaw method of blower motor removal?

David
--
1988 740 Turbo 212k, 1986 245 286k, Gone: 1962 122-wish I had that one back.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ChainsawMethod for resistor? 200 1989

uid 2796's pic
posted by  bulletproof on  Fri Mar 19 01:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:02 CST 2014
[RELATED]

Foster's original post can be found here.

Also the addendum.

I actually used the Eagle Scout method although I was not an Eagle Scout.
--
'80 DL 2 dr








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ChainsawMethod for resistor? 200 1989

posted by  someone claiming to be art on  Thu Mar 18 06:02 CST 2004 [RELATED]

Best you check it out in this link .








  REPLY TO THIS MESSAGE    PRINT   SAVE 

ChainsawMethod for resistor? 200 1989

posted by  Bama740 on  Thu Mar 18 07:24 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 9 06:07 CST 2010
[RELATED]

Thanks, that's great information.

David
--
1988 740 Turbo 212k, 1986 245 286k, Gone: 1962 122-wish I had that one back.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ChainsawMethod for resistor? 200 1989

uid 27's pic
posted by  Art Benstein on  Wed Mar 17 16:21 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

The resistor is mounted with one of the blower motor's three mounting screws. If you can reach the motor, you can get the resistor out.
--
Art Benstein near Baltimore







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.