Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Sway Bar Size (correct dia.) 200 1988

posted by  Robert S. on  Wed Mar 24 06:51 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 21 05:48 CST 2014
[RELATED]

Son's 88 245 DL is going to get new front sway bar bushings soon... but it's not here to measure the sway bar diameter so I can order the correct bushing.

Can anyone help and tell me what the correct sway bar diameter is for an 88 245 with bone stock front suspemsion?

Thanks!

Robert








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Sway Bar Size (correct dia.) 200 1988

posted by  unggthat on  Wed Mar 24 07:30 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

The front bar that came stock should be 21mm. hope this helps,

Nate Gundy
--
'86 240DL sedan, 260K miles, M46, K cam, 25/21mm sways, 260 front and wagon rear springs; http://valvespringcompressor.weblogs.us/







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.