Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help! Hoses for vacuum reservoir for cruise control 200 1989

posted by  lrisius on  Sat Apr 10 07:49 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 17 05:59 CST 2014
[RELATED]

Hi,
I'm installing a cruise control in my 89 240 with a system I pulled from our totalled 240. From my manuals, any 86-89 240 should be the same system. I didn't pay enough attention to the hose routing on the reservoir and "pump". First, do I need vacuum from the engine or is this really a pump? If so, where should I tap in?

The pump has two fittings- one is "servo", I'm assuming this goes up to the dash, the other is labeled vacuum. What do I hook it to? The reservoir has one fitting. What does it hook to?

I just need a quick summary of how to hook this up. I think I have the electronics under control.

Thanks!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help! Hoses for vacuum reservoir for cruise control [200][1989]
posted by  lrisius  on Sat Apr 10 07:49 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.