Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

valve noise update 200 1977

posted by  Joe HC on  Fri Apr 16 15:45 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 21 08:19 CST 2008
[RELATED]

Greetings all-

This is a follow up to my previous posting of a ticking that is becoming quite loud:

http://www.brickboard.com/RWD/index.htm?id=784976

Today I checked the clearance on the shims (B21F), and they were all in spec (.333-.381). The only thing that needed adjusting was that the bearing caps were really tight, so I torqued them to spec. So now I am still getting the noise which can be felt on the valve cover. The insides of the cam bearing caps looked fine, as well as the lobes on the shaft itself. Any ideas what to look for next? Rhys, do you have thoughts on this?

Thanks all-

Joe HC
--
1977 244 160k (?), 1988 245 214k (soon to be dismissed), 1990 244 102k, 1978 Fiat 124 Spyder (restoring)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New valve noise update [200][1977]
posted by  Joe HC  on Fri Apr 16 15:45 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.