Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Harmonic Balance

posted by  FLEETWOOD on  Fri Apr 30 08:50 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a Crankshaft Pulley holder and was wondering if this will work with a MTC or Scan-Tech Harmonic Balance? Also, does anyone have any opinion as to the quality of aftermarket crankshaft pulleys?
Thanks, ER








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Harmonic Balance

    uid 55's pic
    posted by  john sargent on  Fri Apr 30 09:11 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 09:07 CST 2014
    [RELATED]

    Yes, tool 5284 works with the aftermarket harmonic balancers. I had a 1986 760T on which the slots, in the harmonic balancer, were too small to the teeth on the tool. I used rope in number 1 cylinder for that one.

    I use the aftermarket harmonic balancers. They sell for as little as $60 US.
    --
    john







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.