Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wind Deflector Removal 900 1992

posted by  DougW on  Sat May 8 06:08 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Mar 29 14:15 CST 2014
[RELATED]

Hello. I have a 1992 940GL that has what I believe to be either factory or quality OEM wind deflectors installed on both the front and rear side windows, these also have some tinting. Any advice on how to remove these things? They make the car look very stodgy.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wind Deflector Removal 900 1992

posted by  james_a_sousa on  Sat May 8 12:56 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

The older factory deflectors are molded, have seams on them, and have square corners in some places. Aftermarket Ventvisors are vacume formed sheet plastic and have no seams or square corners.

I have just pulled both types off (to re-tape them) Heating the double-sided tape on the deflectors makes it easier to remove.

The Volvo deflectors cost 3-4 times what Ventvisors cost.

I like then because you can leave your windows open in hot weather. Even in cold weather, leaving your windows open a bit is a good idea because moisture can escape.
--
96 855R, 95 855,854, 90 744 Ti - 340,000 Volvo miles put on 7 bricks







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.