Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 700 INDEX

[<<] [>>]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

REPLY TO THIS MESSAGE

SAVE

Park Pawl?Rod 700

posted by old dave on Tue May 11 08:57 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS] [RELATED]

My 85 760 will not come out of park. I removed the linkage and tried to turn the shaft, it is locked solid. I did a search and found a couple of comments about pushing the car the other way to take the pressure off, so I'll try that tonight. I talked to a recommended transmission shop who said that the rod was stuck and that it could be repaired after taking off the throttle body. Anyone done this???
Dave

REPLY TO THIS MESSAGE

SAVE

Park Pawl?Rod 700

posted by old dave on Fri May 14 08:17 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS] [RELATED]

well that was supposed to be valve body not throttle body. Anyone ever done this? I ordered the trans book from volvo, should be here next week. Think I'll wait until I can review the book.

REPLY TO THIS MESSAGE

SAVE

Park Pawl?Rod 700

posted by someone claiming to be Chrissij on Sun May 16 07:51 CST 2004 [RELATED]

I'm always scared every time I take off a valve body. There is a Volvo special tool that holds everything in place when you take it off...otherwise several components just got sprung...I don't know if something could be fabricated to hold everything...but yes, the rod can be replaced.

Chris

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.