Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2015 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

still problem with OD 900

posted by  robhub27 on  Mon May 31 15:18 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 11 08:12 CST 2012
[RELATED]

Hi!
The relay is OK. Can anybody tell me if I have to take oil out of tranny to change solenoid?

Robert 940T '92








  REPLY TO THIS MESSAGE    PRINT   SAVE 

still problem with OD 900

posted by  someone claiming to be David Hunter on  Mon May 31 16:11 CST 2004 [RELATED]

Nope, it's closer to the top of the tranny and no ATF will come out....of course engine not running.

Before changing solonoid make sure it is really bad.
Does solonoid click when button is toggled?

Did you change or resolder the relay?
Many bricksters have been fooled into thinking the relay is good just because it clicks but this is not neccessarily so. In fact the most common OD failure is when the relay clicks OK but power is not transfered to solonoid because of bad solder joint on the relay board. .







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.