Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1997 volvo 960 900 1997

posted by  sswider on  Wed Jun 2 15:25 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Regarding a 1997 Volvo 960

Front wheel hubs. Can anyone provide the torque specification for the hub nut.

Thank you for your assistance.

Stan Swider








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1997 volvo 960 900 1997

uid 11021's pic
posted by  dewfpo on  Wed Jun 2 18:07 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:34 CST 2014
[RELATED]

TIGHTENING SPECIFICATIONS for Wheel Hubs :

Front 100 Nm (73.8 ft. lbs.) + 45°

Rear 140 Nm (103.0 ft. lbs.) + 60°

DEWFPO
--
1998 S90 068,300 and 1995 964 152,300








  REPLY TO THIS MESSAGE    PRINT   SAVE 

1997 volvo 960 900 1997

uid 42's pic
posted by  Shatz on  Wed Jun 2 15:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 6 11:38 CST 2011
[RELATED]

You'll need to have this confirmed because I haven't used it enough to trust the accuracy of this CD manual...but it says 63 ft. lbs. is the correct torque
--
John Shatzer, '97 V90 @ 105K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Your number is for the LUG nut not the HUB nut. 900 1997

uid 19's pic
posted by  jbowers on  Thu Jun 3 04:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 22 13:49 CST 2012
[RELATED]

At least I assume he really means the hub nut. The big one on the stub axle that holds the whole hub assembly in place. I don't have that information handy but other post seems correct.
--
'96 965 with 16' wheels at 116K. Had '85 745 Turbo Diesel for 200K.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Your number is for the LUG nut not the HUB nut. 900 1997

uid 42's pic
posted by  Shatz on  Thu Jun 3 05:10 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 6 11:38 CST 2011
[RELATED]

Another quick read by me.... sorry. I can look it up on the same CD tonight.
--
John Shatzer, '97 V90 @ 105K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.