I had to remove the dash assembly to replace the "T" connection behind for the hose leading to the Turbo guage vaccuum connection behind. When I replace assembly the voltmeter, fuel guage and temp gauge do not work. Any help on cause appreciated. Hope I don't have to replace the whole assembly??.
Thanx in advance..

I haven't done that in a while but remeber that there are some specific connections (wiring to the console) that one must keep track of when pulling the unit - maybe your wiring connections were misplaced - or that the connection to the main wire harness is not connected. Most of those connections hook up with a harness that comes throght the firewall on the drivers side and connects to the wire harness that routes the wires to the oil sensor, the alternator, and the fuel guage in the back is a seperate wire going back along the lower door trim.

good luck