Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2006 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

need B20 pistons .030 140-160

posted by  volvo15 on  Sun Aug 29 09:08 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:19 CST 2014
[RELATED]

Need set of B20 pistons .030 any year,new or used








  REPLY TO THIS MESSAGE    PRINT   SAVE 

need B20 pistons .030 140-160

posted by  someone claiming to be cdu on  Sun Aug 29 11:01 CST 2004 [RELATED]


There are 2 different types of B20 pistons -- 22mm and 24mm wristpin
diameter pistons. The smaller wristpins are for the 63-73 line of B18/20
motors and the 24mm pistons are for the 74-83 b20/b21/b23 motors (the
"metric" B20s from 74/75 and the OHC motors made until they went to the
B230 range in the 80s).

So -- be careful about which B20 pistons you get.
chris








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

need B20 pistons .030 140-160

uid 4464's pic
posted by  brettsutherland on  Sun Aug 29 10:28 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 22 13:00 CST 2011
[RELATED]

Sorry ... but I'm using mine ..... but I do have a question .... what is the displacement of a .030 overbored B20E ??

Brett
--
Brett Sutherland & the 1.5 million mile 122 CANADIAN www.ecvintagevolvo.com








  REPLY TO THIS MESSAGE    PRINT   SAVE 

need B20 pistons .030 140-160

posted by  Phil S. on  Sun Aug 29 11:39 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

2020cc.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

need B20 pistons .030 140-160

uid 4464's pic
posted by  brettsutherland on  Sun Aug 29 16:12 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 22 13:00 CST 2011
[RELATED]

Thanks ... guess 2130 is a .060 overbore then ...
--
Brett Sutherland & the 1.5 million mile 122 CANADIAN www.ecvintagevolvo.com








  REPLY TO THIS MESSAGE    PRINT   SAVE 

need B20 pistons .030 140-160

posted by  Phil S. on  Mon Aug 30 03:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

2130 (actually 2127) is .122" over, using standard B21 pistons.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

need B20 pistons .030 140-160

posted by  walrus3 on  Mon Aug 30 02:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

Bore for 2130 is 3.622" assuming std stroke.
That is why headgaskets are so expensive for them.
--
George Downs, Bartlesville, Oklahoma, Central US







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.