Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2000 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Absober mount 200 200

Hi,

My 240SE 1992 absorber mounts have some hairline cracks on them, resulting
in some noise during slow turns. Should these be replaced immediately and what
brand should I go for.

Thanks very much.

Saidee

Volvo 240SE 1992. 150K. Manual.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Absober mount 200 200

'91 SE? '92 GL?








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Absober mount 200 200

They all crack. no biggie. If you have a clunk, like a spring unloading tension when backing out of a drive or slow turning, the bearing is bad. You can replace it when you do struts, no hurry. Darn Volvo mounts are the best but at a price. Some Scan tech ones are OEM, I've heard. Earlier, there were some duds provided by an asian strut mfg.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Absober mount 200


Rhaire,

thanks very much
I'll let it be for a while
Perhaps in 2 monthstime I'll get it done
the whole gamut, bearings and ball joints

rgds+=
Saidee 240- 92SE, Manual, 150K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.