Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel Rim Question 900

Can a V70R awd rim fit on a 940.Does the bolt pattern fit,and do I need wheel spacers?Thanks for any help.Robert.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wheel Rim Question 900

I would expect the spacer thickness to be betweenn 15 and 20 mm. Offset for the 940 is 20 to 25mm.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel Rim Question 900

You'll need spacers - the offset is different.

-- Kane
--
Blossom II - '91 745Ti/M46 ... Bubbles - '74 144GL/BW35 ... Buttercup - '86 245GL/AW70 ... The Wayback Machine - '64 P220/M40








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel Rim Question 900

Kane,would you know what width of spacer?Thanks for your help.Robert.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel Rim Question 900

25mm is typical, which brings it from 43mm down to 18mm. In the rear, you can push it a bit wider with 32mm spacers.

Recommended by many turbobricks members, Gil Racing is one place that carries 'em.

-- Kane
--
Blossom II - '91 745Ti/M46 ... Bubbles - '74 144GL/BW35 ... Buttercup - '86 245GL/AW70 ... The Wayback Machine - '64 P220/M40







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.