Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2012

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

TRW ball joints

posted by  philski3 on  Thu Sep 23 18:02 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 15 00:14 CST 2007
[RELATED]

I have an 89 240 that needs a left side ball joint. Are the $15 TRW balljoints that FCP Groton sells any good or should I get better. I have read many people say TRW's are good but are these the cheapie ones? They seem to be the only ones they sell. Thanks Phil








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

TRW ball joints

posted by  haroon on  Fri Sep 24 02:46 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 20 11:25 CST 2014
[RELATED]

I think they are good quality. Go with them. I have used them before and they are still strong.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

TRW ball joints 200 1989

posted by  walrus3 on  Thu Sep 23 23:14 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

TRW is good, used as OEM some years.
Q-H is not as good and MUST BE GREASED before installation.
--
George Downs, Bartlesville, Oklahoma, Central US







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.