Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2018 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

SU Carb / linkage rebuild? Portland, OR 140-160

HI--Anyone in Portland, Oregon know someone who can rebuild a pair of SU carbs and linkage on my 68 142S? My regular mechanic and some other shops I've spoken to won't do it. Any ideas?
Thanks in advance....
Tifosi

68 142S 87 240 87 745Ti








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    SU Carb / linkage rebuild? Portland, OR 140-160

    If they leak at the throttle shaft then by all means send em out to either sucarb dude Rhys or Z-therapy.
    If the throttle shafts do not leak then you can do it yerself easily for not too much. Burlen Fuel Systems has the rebuild kits and don't forget to order new needles too (esp. if you are running biased needles).

    Mike!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    SU Carb / linkage rebuild? Portland, OR 140-160

    Z Therapy is somewhere around here... Kinda close anyway. Kinda spendy too, but a good job so i hear... And then there's Rhys =D I got some rebuilt(and slightly modified) by him and am very pleased...(sucarburators.com) Hope this helps!
    --
    Kyle - '68 Volvo 142 w/71 b20b and m40...








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      SU Carb / linkage rebuild? Portland, OR 140-160

      Thanks Kyle!

      Check out www.sucarburetors.com
      If you are willing to mail them, I can rebuild them to like new condition.
      Rhys







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.