Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

S70 wheels on 940- spacer size?? 900

Hi everyone,
purchased my set of s70 T5 wheels recently they look amazing and i am desperate to put them on. i bought them knowing there was a difference in the offset between the s70 and the 940 but have been reliably informed that a good set of hubcentric wheel spacers will solve this problem. i cant remember the exact offsets but would i be correct in assuming that the size of spacer required is simply the difference between offsets - as i recall 21mm?
if someone could confirm or deny this then that would be great?
has anyone made this modification?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    S70 wheels on 940- spacer size?? 900

    Check out Gil Racing. He makes a very high quality adapter - both hub and wheel centric.

    http://www.gilracing.com/VolvoSpacers/index.html

    I have done this on a 240 using the 25mm adapters front and rear and it has worked out fine.

    Key point is that you need more than spacers...you need adapters. 25mm is way too wide to just throw in a spacer. You are looking at $300.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.