Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

760 gle injection system checks 700

my 760 gle unfortunately doesnt have any fault code diagnostic(at least I dont think it as!)so Im looking for values and diagnostics to perform with a basic multimeter.Can anyone on the board email me over values and checking procedures

Another question what should the co level be for this non cat engine








  REPLY TO THIS MESSAGE    PRINT   SAVE 

760 gle injection system checks 700

Assuming you have an '87-'90 760 GLE, you should have a basic diagnostic tool built the ignition system (but not the primary fuel system as equipped on the later cars). There's more info on it in the 700/900 FAQ and the following post:
http://www.brickboard.com/FAQ/700-900/EngineV6.htm#DesignforanLEDSensortoDiagnosetheV6


Again, this is a really basic diagnostic tool that's intended for diagnosing a problem with the knock sensors, temp sensors, etc.'

I'm still in the process of acquiring info about the B280 (3rd Generation PRV-6 engine), but I'm a proud owner of one myself. I need to get my hands on a 760 or 780 Specifications book.

God bless,
Fitz Fitzgerald.
--
'87 Blue 240 Wagon, 250k miles.
'88 Black 780, PRV-6, 146k miles.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.