Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 8/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

oil drain plug specs 200

posted by  rami on  Sat Dec 25 07:42 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 28 20:34 CST 2013
[RELATED]

does anyone know the specs of the oil drain plug off the top of their head?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

oil drain plug specs 200

uid 42's pic
posted by  Shatz on  Sun Dec 26 00:25 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 6 11:38 CST 2011
[RELATED]

Not sure how deeply you wand to go into this, but it's a19mm head, but I suspect you already know that one...
--
John Shatzer, '97 V90 @ 105K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Not on a 240! 200

posted by  Kane on  Sun Dec 26 08:22 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The head is 1" or 25mm on a 240. Perhaps on the later white blocks they went with a 3/4" (19mm) head.

-- Kane
--
Blossom II -'91 745Ti/M46 ... Bubbles -'74 144GL/BW35 ... Buttercup -'86 245GL/AW70
The Wayback Machine -'64 P220/M40 ... The ParaBox -'90 745GL/AW70








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Not on a 240! 200

posted by  neptune242 on  Mon Dec 27 16:05 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 20 13:00 CST 2012
[RELATED]

The oil temp sensor type drain plugs are 7/8". 23mm? I think. My metric set doesn't include anything that large, at least not yet.
Normal drain plugs are indeed 1", at least on B18-B230's that I have had.
Can't remember what the white blocks were for certain, but I thought it was 14mm? on the 2000 R.
--
1981 242 GLTi 1967.5 122S
Seattle, WA








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil drain plug specs 200

posted by  rhaire on  Sat Dec 25 08:12 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 4 10:16 CST 2014
[RELATED]

3/4" SAE thread








  REPLY TO THIS MESSAGE    PRINT   SAVE 

To be more exact, 3/4 x 16 TPI (nmi) 200

posted by  Kane on  Sat Dec 25 22:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]








  REPLY TO THIS MESSAGE    PRINT   SAVE 

oil drain plug specs 200

posted by  rami on  Sat Dec 25 10:18 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 28 20:34 CST 2013
[RELATED]

thanks!






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.