Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

OD control light - which pin on instrument cluster? 200 1979

posted by  Ivch on  Sat Jan 8 06:38 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Can someone tell me where (to which pin on the back of instrument cluster) goes the yellow wire from the OD relay??

I know on '80- bricks it connects to pin 4 on the round connector, but it does not work on '79 ...

'79 Ivch
'79 244Gl
'82 244Ti
'86 245T almost gone








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    OD control light - which pin on instrument cluster? 200 1979

    uid 18083's pic
    posted by  lucid on  Sat Jan 8 07:23 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 12:31 CST 2014
    [RELATED]

    My older Haynes manual shows the yellow wire from the switch going to instrument connector 31-12, and then on to the solenoid. No relay until '83 I think. Manual shows 31-12 (not 4) for '80 OD light also.
    --
    Bruce Young
    '93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.