Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Valve Adjustment Tool to Borrow in Sonoma County? 200

Does anybody live in Sonoma County and have a valve adjustment/spring compressor tool I can borrow?

I checked my clearances last night and I only have one valve out of spec. (0.019") I can't bring myself to buy the tool or take it to a shop to adjust this one measly valve.

Sincerely,
Isaac Hastings








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve Adjustment Tool to Borrow in Sonoma County? 200

I've done it on VW diesels(same configuration)
with a screwdriver.I don't know where to get the
different thickness shims,
unless it's a dealer. Pik N Pul? Remember, VW Rabbitts
use the same shims; both gas and diesel!








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Valve Adjustment Tool to Borrow in Sonoma County? 200

VW Rabbitts
use the same shims; both gas and diesel!


Same type but I'm not sure about size. My son brought some home once, saying they were VW. When we compared to my stash, they were a smaller diameter.

One car that I know uses the same shims (because I had one and a buddy gave me a dealer shim set) is the FIAT 1.7L twin-cam from the '70s. Not many of them around though.
--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.