Any good ones? Need to pull some parts.....

Pull-A-Part on Buford Highway in Duluth...

Volu-Parts on Howell Mill Road near Atlanta Water Works... They have enough spare parts to build a 240 a thousand times over. www.voluparts.com

If I'm not mistaken, Pik N Pull is headquartered in Atlanta.
I realize this by no means suggests there will
be a Pik N Pull salvage yard there, but it's likely.
Barring that, use the yellow-pages and find out which ones
allow you to pull your own parts.
Happy Brinkin'!

Valuparts is across from the Atlanta Water Works on Howel Mill Rd. but is a salvage operation.. There is a very large slavage operation in the same area on Chattahoochie Drive, near the intersection of Howell Mill Rd.... Pull-apart is a pick- and -pull located between Norcross and Duluth on US Hwy 23. $1 gets you in and the parts are almost free! It must also be noted that there typically is nothing newer than 700's at Pull-apart, but lots of 240'... They are usually stipped down to the bone by the time I get to them! The operation on Chattahoochi drive is your best bet for newer models.. I think he even sells used Volvo's there too..

"...There is a very large slavage operation in the same area on Chattahoochie Drive, near the intersection of Howell Mill Rd..."

It's called Auto Disassembly Volvo (I know, they got their adjectives and nouns a bit screwed around, but they've got an S-load of Volvos over there.)

Phone: 404-351-7730

I've been there more than a few times this month. the owner is grouchy, but be prepared to negotiate. Lot's of 244/245 and a few 242's + new stuff too.