Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Anyone know anything about these rear wheel bearings? 200

I saw this rear wheel bearing on EBAY and wonder if anyone has any experience with them. It indicates that the seals are part of the bearing. It sounds like it might be factory packed and sealed with no need for the oil or grease seal.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7958730673&category=6763








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Anyone know anything about these rear wheel bearings? 200

I put a rear wheel bearing in a 240 last year and was suprised that it came with 2 seals, inner that presses into the axle housing, the rear differential oil does not lubricate the bearing. Outer to keep water/dirt out of bearing. This was a volvo bearing kit, even came with a tube of bearing grease.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Anyone know anything about these rear wheel bearings? 200

ALSO You probably need to have an expert with the proper diameter tooling and hydraulic press remove and install the bearing on the axle. This is the only thing that holds the axle in and the wheel on the car. Could be disappointing to have it fall out.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.