Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Temperature Gauge Sender on 740 Turbo 700

posted by  Colin_D on  Thu Mar 31 07:20 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My 740T has a broken temperature gauge sensor in the cylinder head under port two.

Any advice for easy removal without taking off the mainfold, only I don't want to shear it off in the head?

Do they come out resonably easy with a 19mm socket? or is it a real knuckle duster?







  REPLY TO THIS MESSAGE    PRINT   SAVE 

Temperature Gauge Sender on 740 Turbo 700

posted by  Steve on  Thu Mar 31 09:38 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

As I recall, the connector gets in the way and I had to use a stubby wrench to get it out. At least it's in front: the ECU temp sender is buried behind and is impossible to reach without removing the manifold.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.