Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

B230 intake mods for a b21FT 200 1984

I have seen somewhere before a detailed how-to guide on how to modifications to make a B230 intake work on the B21ft. I cannot remember where I saw it at.If someone will send it to me or tell me where I can find it. Also if I make the change will I be able to use the 700 intercooler hoses instead on the oh so high dollar 200 hoses? Thanks Bill








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B230 intake mods for a b21FT 200 1984

In addition to the original article that Bob posted, you might be interested in this thread on Turbobricks. http://forums.turbobricks.com/showthread.php?t=37653
I am using the B21FT hoses from the turbo to intercooler and the B230FT hoses from the intercooler to the intake manifold currently. When I first completed the swap I used the B230FT hoses on both sides.
Good luck with your swap.
--
1981 242 GLTi 1967.5 122S
Seattle, WA








  REPLY TO THIS MESSAGE    PRINT   SAVE 

B230 intake mods for a b21FT 200 1984

Is this what you're looking for?

http://www.geocities.com/MotorCity/Garage/6776/b23mani1.html

--
Volvo Farmer:

21 Volvos '58-'91

445-544-122-144-1800-240-740

sorry, no FWD







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.