Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Just replaced my first exhaust 200 1991

posted by  Joyca on  Fri Apr 22 14:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello all,

I installed a Starla exhaust today, everything after the Cat. It was pretty straight forward. The front muffler to Cat connection was rusted together a bit so I just cut a few strips and bent them back to free it up. All in all it took 2.5 hours which included an oil and filter change. I can't complain since I did it by myself. It's nice to get under there and DIY. I estimate at least a $400 savings I guess. Thanks for this board and all the help it gives me.

Chris








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Just replaced my first exhaust 200 1991

posted by  jwalker on  Sat Apr 23 01:09 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 08:39 CST 2014
[RELATED]


Yeah, 240's are pretty easy. A nasty job though with all the rust, dirt and soot etc....

--
90 244DL 252K - original engine/drivetrain :)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Just replaced my first exhaust 200 1991

posted by  iross on  Fri Apr 22 15:41 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Congrats! I think i might do the same when my current exhaust dies.

-ross







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.