Can anyone give me the size of the spindle nut on the 93 944? I've not found it in the FAQs.

Thanks Much,
--
Will Dallas, www.willdallas.us, www.willdallas.org, 86 245 DL 205K miles, 93 940 250K miles, 88 765 GLE 149K miles, 87 745 , 86 244 DL 200K Miles

Dear Will,

Good p.m. and may this find you well. If you mean the nut, that holds the wheel hub to the stub axle, I believe that's a 36mm.

If you mean the bolt, that holds the crank pulley onto the crankshaft, I believe that's a 26mm.

I hope that someone else, will confirm these, as I've not had to remove these recently.

Yours faithfully,

spook

Hi Spook,

I checked the nut with a caliper and it measured 1.47" across the flat. If I can find the socket in 1/2". I'm in business.

Thanks,
--
Will Dallas, www.willdallas.us, www.willdallas.org, 86 245 DL 205K miles, 93 940 250K miles, 88 765 GLE 149K miles, 87 745 , 86 244 DL 200K Miles

Dear Will,

Good p.m. 1.42" = 36mm. I believe Sears has 36mm sockets, in a 1/2" drive. They should be less than $10.

Best of luck.

Yours faithfully,

spook

Thanks Spook,

I'll pick one up today.

Regards,
--
Will Dallas, www.willdallas.us, www.willdallas.org, 86 245 DL 205K miles, 93 940 250K miles, 88 765 GLE 149K miles, 87 745 , 86 244 DL 200K Miles