Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2006 S90-V90 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine/Transmission Mounts S90-V90

How would I check for wear on Engine/Transmission Mounts.....I get the feeling they are worn as I get knocking from underneath going over bumps as if the transmission is moving around a little too much and chinking against something. And the engine seems to knock too when I throw the car around a bit...though not as bad as the transmission does.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine/Transmission Mounts S90-V90

looks like transmision mount, it is weak point..

--
Gregski; european V90 '97 B6304FS2 AW3043 IGS HID








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine/Transmission Mounts S90-V90

Has anyone ever changed these mountings on these vehicle?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine/Transmission Mounts S90-V90

I've changed all 3 on my 96. The new engine mounts give about 3/8" clearance between the oil pan and the front crossmember. The old mounts allowed the pan to rest on the crossmember. I just changed the transmission mount for good measure. Had about 100K when I changed them, took about 2 hours for all 3 mounts. Not a bad job. Good luck.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.