Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Sway bar size 89 244 200 1989

Hi all,
I have searched the site for the stock sway bar (stabilizer bar) size for an 89 244 and an 89 245. I know its here somewhere, I just cannot find the right search words I guess. I seem to remember the wagons were slightly larger, but since my parts wagon is 25 miles away I can't just measure them here. Thanks for the help.
Palmer
--
1994 944na, 1980 265 V8, 1989 244, 1987 745ti








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Stock front, ~22mm, rear, ~18mm (compared to IPD's 25/22mm). NMI. 200 1989








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Sway bar size 89 244 200 1989

Front sway bars are the same, wagon has smaller rear bar due to the heavier rear springs. If you want bigger bars best bet is to find a turbo.
--
Dave Shannon
Spring Valley, California
'67 1800s
'73 1800ES
'88-240
my pages








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Thanks Dave. 200 1989

I was just hoping for a no cost upgrade. I'll keep looking for some turbo bars, but in Michigan any Volvo in the junkyard is rare.
Thanks again,
Palmer
--
1994 944na, 1980 265 V8, 1989 244, 1987 745ti







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.