My 90-240 wipers have been out for a few weeks and I have changed the relay and still nothing. I am getting no sound from the wiper motor. How can I check if it is the motor or something else?

My 93-940 washer is not working, so I checked out the fuse, it is OK. I pull the motor out and cleaned everything and still no sound or anything. How can I check if I am getting power to the motor? Is there an inline fuse or relay that I do not know about? This has been really frustrating.

Anyway, thanks as always.

Don

i recently had to replace my 244 wiper motor too. The motor houseing had been leaking and the armature rusted to the field and ...no spin on the motor....It is an easy replace...but it does involve taking out the glove box to connect the motor to the linkages and resealing the motor to the firewall and mounting the ground strap to the body...the original motor had no strap, but a sheetmetal screw does just fine...good luck.

Sounds like you have an excuse to go and buy a new digital multi meter, about $20 for the cheapest models at Sears , Radio Slack etc. Or at least a 12volt test light, they are only about $4-5.
--
Gary Gilliam Sumerduck VA, '94 940 na Regina 150k, '86 240 180k