Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Studs 200

posted by  goates on  Mon Jul 18 13:34 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 11 10:16 CST 2009
[RELATED]

'88 240 GL

Anyone know off the top of their head a place for the 2 engine studs that attach the Water Pump to the engine block? I bought a assort. pack from Autozone, and they don't have the correct length. Nobody seems to have them.

Thanks,

goates








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Studs 200

posted by  89740GL on  Mon Jul 18 13:46 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 9 17:50 CST 2007
[RELATED]

if u can measure what size you need and thread leignth try like a Home Depot or some hardware store
i've done that many times
just a thought







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine Studs 200

posted by  bosozoku on  Mon Jul 18 13:37 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 16 14:31 CST 2007
[RELATED]

Try a Volvo dealer, McMaster-Carr, or any other good industrial supply house. Or take the poor man's route and use an angle grinder to behead a bolt of appropriate size, making sure to bevel the end so you can screw on a nut.


-b.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.