Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pressure gage for 760 Turbo 700 1986

posted by  someone claiming to be Ron on  Thu Jul 21 03:42 CST 2005 [RELATED]

I want to install an oil pressure gage on my '86 760 Turbo, B230FT engine, to suppliment the idot light. Any recommendations regarding source of gage and installation suggestions?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pressure gage for 760 Turbo 700 1986

posted by  mcduck on  Thu Jul 21 05:10 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 9 11:47 CST 2012
[RELATED]

http://www.egauges.com/vd2_main.asp

The direct fit sender, with contact for the light, is much more expensive than the 1/8NPT sender + adapter(to M14X1.5).
The 1/8NPT sender is the same as 240 turbos; I'm using one from the pick-n-pull.
I mounted one in the dash vent on the far left, but now I have matching VDO "Vision" oil temp and pressure gauges mounted in a pod on the dash.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.