Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2005 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  volvito on  Tue Aug 2 11:33 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 23 04:59 CST 2014
[RELATED]

The Injectors in my 940. B230 engine are gummed and stock in the close position. Is there any way to clean them? Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  david hunter on  Wed Aug 3 03:03 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 30 22:10 CST 2014
[RELATED]

I am curious how you diagnosed the problem as that would be a most unusual condition.
--
David Hunter








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  volvito on  Wed Aug 3 12:29 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 23 04:59 CST 2014
[RELATED]

The injector have been out of the car for some time, because of overhauling the engine. When everything was back together the car would not start so I pull out the injectors rack and cranked the engine, there was not spray. I installed the injector rack from my other 940 and the car is running fine, so I assume they are gummed or something similar.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  brownboy on  Tue Aug 2 11:55 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jan 1 14:31 CST 2010
[RELATED]

Here are the diy directions from the 700/900 FAQs:
http://www.brickboard.com/FAQ/700-900/EngineFuelinjection.htm#Injector_Cleaning

Some on the list recommend taking the injectors out and having them professionally cleaned. I have no experience with this. I am sure someone else on the list will send a note about where they had it done.

Hope this helps.

Mike
--
Mike Brown Greenville, NC 1996 965 120K 1994 940 137K 1986 244 137K (odometer broken)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  rjk on  Tue Aug 2 23:57 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Dec 12 12:30 CST 2009
[RELATED]

Rich at Cruzin Performance

http://www.cruzinperformance.com/

can take care of you. Just had mine done after 210k miles. Better flow and spray pattern, I'm happy. His website outlines what he does and how. Recommended.
--
Bob K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  volvito on  Wed Aug 3 02:45 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 23 04:59 CST 2014
[RELATED]

Many thanks. Sound very good.I will send the injectors in.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Gummed Injectors 900 1995

posted by  mvftw on  Thu Aug 4 05:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I would recommend these guys over cruzinperformance
http://www.lindertech.com/reconinj.htm







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.