Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940T A/C problem 900 1993

posted by  someone claiming to be D-squared on  Fri Sep 9 03:58 CST 2005 [RELATED]

I have a 93" 940T with 140K miles and yesterday my wife called me and said the A/C wasn't cooling. We I got home I checked and the compressor wasn't kicking on so I thought that the system was possibly low on freon. I tried to feed in a can hoping that the can pressure would be enough to make the system pressure switch an energize the compressor which it did not. In reading some of the past responses on the brickboard it looks like I could try and isolate the pressure switch by jumping 12V to the connector going to the switch or just jumping two terminals on the connect to simulate the switch operating correctly I wasn't sure of the proper method. If not the problem it looks like the control unit solder joints is the next possibility - is this directly behind the fuse panel in the center console ? Are there any other things I should check first ?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940T A/C problem [900][1993]
posted by  someone claiming to be D-squared  on Fri Sep 9 03:58 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.