Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

routing coolant to the manifold 120-130

uid 17774's pic
posted by  Damian on  Sun Sep 11 05:31 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

A few folks on the board were kind enough to send info/ photos of how they routed the radiator coolant to the manifold. Thanks!

I noticed that my B20F head has a plug installed where it looks like the coolant would need to be routed from (hard to see, but there definitely is a plug at the end of the arrow!) If I want to make this modification, how do I get the plug outta there? Drill? Does the head have to come off?

In addition, there aren't any bolt holes on either side of the plug, so I don't see how I could secure any modification to the head.

Gonna be contacting my tech about this next week, but until then, wondering what's involved.

Damian







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New routing coolant to the manifold [120-130]
posted by  Damian  on Sun Sep 11 05:31 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.