Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Pressure Sender / Oil Pickup Tube Seals? 200 1993

posted by  RicoS on  Fri Sep 16 04:25 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 02:18 CST 2014
[RELATED]

The oil pressure has become a little hinky on my '93 240. The idiot light stays lit until the engine has caught whereas previously it would go out while the engine was still cranking. Also, the pressure gauge is reading a little lower at hot idle. Before I bite the bullet and pull the pan to see if the oil pump pickup tube o-rings are all right, I want to rule out the oil pressure sender. Does anyone have a part number of the exact, after-market replacement for an oil pressure sender with an idiot light contact for a '93 240?

Also, is it best to get the oil pickup tube seals (o-rings) from the dealer or are they just a generic item?

Thanks,
Rich







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.