Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cutting off a brake circuit (164) 140-160 1975

posted by  someone claiming to be Jerry on  Mon Sep 19 19:12 CST 2005 [RELATED]

The problem is on my 164 but I figure the same solution(s) work across the board....

So my new 164 has a stuck front passenger side caliper. It didn't give me much warning (I didn't have a chance to get home) before the thing started leaking fluid and I had no brakes. I checked out the other brakes and they seemed alright. The bad caliper is rusted shut (open) and I can't do much with it at all. My question is.... How and could I safely cut off the offending caliper from the rest of the brake system so that I can safely move the car? Could I just cap the lines running to that caliper? How safe is it to drive with 3 brakes? If it is feasible, what is the best way to bypass the bad one? The rotor I'm sure is beyond repair as is this caliper, at this point but, finding a reasonably priced caliper and rotor may take some time. To make things even more difficult it's a 75 164 with fuel injection meaning ATE caliper up front right?
Thanks,
Jerry






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cutting off a brake circuit (164) [140-160][1975]
posted by  someone claiming to be Jerry  on Mon Sep 19 19:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.