Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re-camming a N/A 200

posted by  Capt'n Crunch on  Tue Sep 20 04:33 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 20 17:09 CST 2009
[RELATED]

I was at the 'SAW'(local pick-an-pull) and removed a 745t head camplete with a 'T'-cam. I am going to 'P' and 'P' the head and take my time to make a head that flows better than the stock. Both heads are 530's (turbo and N/A) so the change with be a snap. As I have the 'T'cam for the cost of the head.

MY QUESTION IS: Would the removal of the 'M' and replaceing it with the 'T' show me ANY gains in the lower RPM (1000--3500) range or should I wait till I find an 'A-cam' to increase the low end pull(I have a 3.31 diff gears and LOVE the 30 mpg that it get's)

PS: fuel in Canada is now $1.10 @litre(as in 4 of this to a gallon)$1.10x4= #@&^%$





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Re-camming a N/A [200]
posted by  Capt'n Crunch subscriber  on Tue Sep 20 04:33 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.