Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

160 head gasket 140-160

So the other day I left the car running while I went into the house. I was distractred and the car idled for about 20 minutes. When I came back steam was pouring out of the hood. Car was HOT. I turned it off, let it cool down added some water and was one my way. The car ran fine. Yesterday, things were different. I was out and all of sudden the temp shot up. I turned it off and popped the hood. Water was seeping out between the head and block.

So I have a job to do. I've done the head gasket on two different 700 series cars. Is there anything special I should know going into the job for the 164? I'm assuiming it wasn't the head gasket that caused it to overheat the first time so I guess I should look around to find the culprit. Is it true that the '75 radiator is impossible to replace? The core doens't look so good. About how much would it cost to recore that thing? Its a 1975 with injection if that changes anything.
Thanks
Gerald






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 160 head gasket [140-160]
posted by  someone claiming to be gerlad  on Mon Oct 10 11:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.