Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

oil cooler adapter (oil filter housing) B230FT leaking oil. 900

1991 945 SE / 2.3l turbo motor. the part oil filter bolts on is some sort of
manifold that bolts to block. its leaking motor oil all over 2 steel tubes
that drop down below oil filter. I got parts from volvo dealer and not sure
if they are correct. from what I can see there are 2 smaller bolts and 1 large
bolt holding this part to block. dealer gave me
2 - large green o-rings (2.5" diameter)
2- 14mm approx metal washers, crush washers.
1 - 22mm metal washer, crush washer.

the metal washers look correct but the larger green o-rings look way too big,
does it appear I have the right stuff ? I would have thought these o-rings
would have been smaller. they may be correct, any ideas? ? ?

volvo p/n 967343-5 (o rings)
957189-4 gasket
957179-5 gasket
--
Kevin P Walsh, Casper WY. '91 945 SE turbo 175,000 miles / paid for






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil cooler adapter (oil filter housing) B230FT leaking oil. [900]
posted by  K.P.W.  on Wed Oct 12 13:08 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.